Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online

GEO5

Tree
Settings
Sản phẩm:
Chương trình:
Ngôn ngữ:

Automatic Calculation of Height

When defining points, boreholes and points of ground water table the program in some cases automatically calculates the point height (z-coordinate) and eventually the layer thickness. This function is particularly valuable when editing terrain or layers.

The possibility of height calculation depends on the status of generated terrain:

  • If no terrain is generated, the height is not calculated and the respective field remains empty (blank).
  • If terrain is generated for the current data (displayed on the desktop in a non-transparent mode and in regimes Generation, Point constructions, Line constructions and Launching also in a color mode), the required values are then automatically calculated from the model of terrain - for a point it is the z-coordinate, for a borehole the program further determines the layer thickness and possibly also the depth of the ground water table - when a point or a borehole is specified the status of generated terrain is changed and the drawing is switched to a transparent mode (the terrain is generated for the original input, not for the current input).
  • When the terrain is generated, but it is not the current one, the z-coordinates and layers thicknesses are automatically calculated for the last generated terrain.

Information regarding the terrain status (not generated, generated, generated for the original data) are displayed on the vertical tool bar. The frame "Generate" allows for terrain generating or removing the generated model.

Dialog window - add new point and calculate the Z-coordinate

Dialog window - add new borehole and calculate the Z-coordinate, thickness of GWT and layer thicknesses

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích