Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online


Sản phẩm:
Chương trình:
Ngôn ngữ:


The "Analysis" frame displays the analysis results.

The frame has two variants. The first variant applies to a non-anchored wall (sheet pile) and the second one to an anchored (strutted) wall.

It is possible to enter a coefficient of reduction of passive earth pressure for both variants.

Using the verification methodology Limit States or Safety Factor, it is possible to specify factor of safety for a non-anchored wall.

A type of heel support (fixed, free) is specified for an anchored wall.

When performing the analysis according to EN 1997 or LRFD the design coefficients are introduced in the "Pressure Analysis" tab. Providing the analysis according to Design approach 1, it is necessary to also enter the combination number.

The analysis results are displayed on the desktop. Visualization of results can be adjusted in the frame "Drawing Settings".

Frame "Analysis" - non-anchored wall

Frame "Analysis" - anchored wall

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích