Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online


Sản phẩm:
Chương trình:
Ngôn ngữ:

Mesh Generator Warning

In the "Mesh generation result" dialog window the user is prompted for possible locations on the structure that may cause problems during automatic mesh generation. When positioning the cursor on individual warnings the corresponding critical region on a structure is highlighted with a red color. The following items are checked:

  • whether the distance between two points is greater than one tenth of the required element edge length
  • whether the distance between a point and a line is greater than one tenth of the element edge length
  • whether the area of a region is greater than twice the element edge length
  • whether points and/or lines are found inside the structure (in the soil)

These warnings suggest locations, in which the mesh generator experience problems. The following possibilities may occur:

  • the mesh is not generated => this calls for a new input of geometrical data
  • the mesh is generated => in this case it is up to the user to decide whether the mesh is reasonable - in any case, the warning can be further ignored and the analysis can be carried out

Warning after identifying critical sections in FE mesh

Critical section after zooming in - two points are too close to each other

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích