Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online

GEO5

Tree
Settings
Sản phẩm:
Chương trình:
Ngôn ngữ:

Meyerhof Method (CPT)

This solution for cohesionless soils use a Meyerhof theory, where the bearing capacity of foundation soil is given by a formula:

It is recommended to use a safety factor FS = 3 when calculating the bearing capacity using this method.

where:

Rd

-

bearing capacity of foundation soil

qc

-

average value of cone penetration resistance measured at depths from footing base to 1,5*bef below the footing base

bef

-

effective footing width

Cw1,Cw2

-

GWT influence factors

d

-

depth of footing bottom

Ri

-

load inclination factor

The formula is derived for imperial units [tsf, ft] - the program calculates automatically in the units used in the program.

GWT influence factors Cw1 and Cw2 are determined as follows:

hGWT = 0 (water in the terrain level) -> Cw1 = Cw2 = 0,5

hGWT = d (water in the depth of footing bottom) -> Cw1 = 0,5; Cw2 = 1

hGWT > d + 1,5*bef -> Cw1 = Cw2 = 1

where:

hGWT

-

depth of ground water table from the terrain

Intermediate values Cw1 and Cw2 are interpolated.

Load inclination factor Ri is interpolated according to the following table:

H/V

Ri

d/bef = 0

d/bef = 1

d/bef = 5

0.10

0.75

0.80

0.85

0.15

0.65

0.75

0.80

0.20

0.55

0.65

0.70

0.25

0.50

0.55

0.65

0.30

0.40

0.50

0.55

0.35

0.35

0.45

0.50

0.40

0.30

0.35

0.45

0.45

0.25

0.30

0.40

0.50

0.20

0.25

0.30

0.55

0.15

0.20

0.25

0.60

0.10

0.15

0.20

where:

H

-

horizontal component of resultant load

V

-

vertical component of resultant load

This method should not be used for ratio H/V > 0,6.

The influence of inclined terrain and inclined footing bottom is considered same way as in Schmertmann method.

Literature:

FHWA-SA-91-043: THE CONE PENETROMETER TEST

Bridge Engineering Handbook (Wai-Fah Chen, Lian Duan, 1999)

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích