Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online


Sản phẩm:
Chương trình:
Ngôn ngữ:

Rigid Body

The "Rigid bodies" frame contains a table with a list of input rigid bodies. The rigid bodies serve to model regions with a high strength - e.g. sheeting structures or rock subgrade. This table also provides information about the currently selected rigid body displayed in the right part of the frame.

Adding rigid bodies is performed in the "Add new rigid body" dialog window. This window serves to input the unit weight of the rigid body material and to select color and pattern. The rigid bodies are in the "Assign" frame ordered after input soils.

Rigid bodies are introduced in the program as regions with a high strength so they are not intersected by a potential slip surface. Providing we wish the slip surface to cross a rigid body (e.g. pile wall), it is recommended to model the rigid body as a soil with a cohesion corresponding to the pile bearing capacity against slip.

Input rigid bodies can be copied within all 2D GEO5 programs using "GeoClipboard".

"Rigid bodies" frame

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích