Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online

GEO5

Tree
Settings
Sản phẩm:
Chương trình:
Ngôn ngữ:

Internal stability of a Gabion Wall - Limit States

Reduced parameters of the gabion material, which depend on the coefficients set in the "Wall analysis" tab, are used in the verification analysis.

1) Check for overturning stability:

where:

Movr

-

overturning moment

Mres

-

resisting moment

2) Check for slip:

where:

N

-

normal force

φd

-

design angle of internal friction of soil

cd

-

design cohesion of soil

d

-

width of block

e

-

eccentricity

γs

-

reduction coefficient of sliding resistance

H

-

shear force

Fres

-

resisting force (from georeinforcement and mesh overlap)

µ

-

reduction coefficient

3) Check for bearing capacity with respect to the lateral pressure:

where:

T

-

average value of pressure acting on the face of bottom block

S

-

force per one running meter of the joint

Su

-

joint bearing capacity (for input use the "Material" frame)

b

-

width = 1m of structure width

h

-

height of the block

Dtotal

-

overall width of meshes loaded in compression T

4) Check for bearing capacityof joint between blocks:

where:

Nd

-

tensile force per one running meter of the upper joint of the bottom block

Nu

-

strength of mesh (for input use the frame "Material")

Qtr

-

shear force transmitted by friction and cohesion between blocks

γt

-

reduction coefficient of friction between blocks (for input use the "Wall analysis")

h

height of the block

Dtotal

overall width of meshes loaded in compression T

Dupp

width of upper mesh between blocks loaded in tension

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích