Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online


Sản phẩm:
Chương trình:
Ngôn ngữ:

Horizontal Bearing Capacity - Elastic Subsoil (p-y Method)

The program calculates internal forces on pile and verifies the bearing capacity of cross-section (concrete, steel, wooden).

The internal forces can be carried out for:

  • individual loads
  • prescribed displacement
  • the most critical load

Assuming the prescribed displacement type of load requires the introduction of boundary conditions in pile head (translation and rotation).

The fixed end type of boundary condition prescribed in the pile heel can be assumed for all types of load.

The combo list serves to specify the direction of pile verification (x, y,results in the most stressed direction).

Frame "Horizontal bearing capacity" - Elastic subsoil (p-y method)

According to the selected cross-section and material the program verify a bearing capacity of cross-section. (The cross-section and material are selected in the frame "Geometry".). In some special cases (user-defined, concrete pipe) are displayed only internal forces and deformations - the verification of cross-section can not be performed.

Reinforced Concrete

Program verifies the reinforcement according to standard selected in the frame "Materials and standards" tab. The pile is verified for shear, bending + compression and reinforcement ratio. The reinforcement is entered using checkbox "Pile reinfrocement". For a more detailed design of reinforcement, the option of dimensioning in sections is available for circular and square piles. Each section is assessed separately.

In case of circular pile profile of reinforcement, number of profiles and concrete cover are input. Reinforcement of square pile is according to the picture.

Verification of RC pile - entering reinforcement parameters

Steel, Timber

The pile is verified for shear and bending + compression.

Shear and bending + compression verification of pile

Verification of pile is not performed

The "In detail" button opens the dialog window that contains a detailed listing of the verification results.The analysis results are displayed on the desktop. Visualization of results can be adjusted in the frame "Drawing Settings".

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích