Đường link đã được gửi tới email của bạn.

Chúng tôi không thể gửi đường link đến email của bạn. Vui lòng kiểm tra lại địa chỉ email.

Hỗ trợ online

GEO5

Tree
Settings
Sản phẩm:
Chương trình:
Ngôn ngữ:

Design Approach 3

Design approach 3 applies the partial factors to load actions and at the same type to material (material parameters of soil).

Contrary to other design approaches, it distinguishes geotechnical loads - GEO State (load actions caused by soils - e.g. earth pressures, pressures due to surcharge, water action) and loads applied to structures - STR State (the program considers the structure self-weight, applied forces acting on the structure, anchors, geo-reinforcements, mesh overhangs). A different set of coefficients, specified in the "Partial factors" dialog window, is used for each type of load. Partial factors applied to geotechnical loads are mostly smaller than those applied to structure loads.

Input of partial factors for design approach 3

Hãy tự trải nghiệm GEO5. Miễn phí, không có giới hạn khi phân tích