GEO5

Hướng dẫn trực tuyến

Tree
Settings
Chương trình:
Ngôn ngữ:

Calculation of fines content FC

The fines content FC [%] is determined using the following equation:

Where:

ΔCFC

-

calibration parameter (entered in the "Soil" panel)

In the general case, when site-specific laboratory data from calibration samples are not available, ΔCFC = 0 is assumed. If the user has sieve analysis results from the same site, the value can be adjusted within the range <−0.3;0.3> so that the estimated fines content curve corresponds to the actual laboratory data points.

The soil behavior type index Ic,SBT can either be entered directly in the "Soil" panel or calculated from the results of the CPT test.

Hãy tự trải nghiệm GEO5. Miễn phí.